The exterior of the house is the first line of defense against Seattle's weather. All roofing contractor Seattle and siding contractor Washington will tell you that this is the most important part of the house, which not only needs to be repaired in time but also inspected frequently as well. Professional inspections are carried out at large intervals but self-inspections can be done regularly. Experts at TOV Siding help us in indicating maintenance practices that give siding and roofing a long life. We also shed light on some of the inspections that should be carried out in Seattle to keep the house safe and maintenance-free for a long period.
Before jumping to maintenance and inspections, it is important to understand the natural forces your home's roof and sidings goes up against. Seattle receives an average of 150 days of rain. This is more than enough to add a considerable amount of moisture which leads to mold, bacteria and the falling of siding concrete and roof shingles. In order to fight the weather menace, maintenance and inspections by a professional roofing contractor Seattle is of utmost important. However, self-inspections lead to better maintenance and more knowledge about siding repair Washington.
The importance of regular roof and siding inspection cannot be over stressed. This ranges from basic clogging inspection to checking underlayment and insulation parts. Regular inspections help Seattle homeowners in reducing regular maintenance cost as well as full blown roofing repair Seattle or siding repair Washington. Some of the inspections that must be carried out at least once or maximum twice a year include:-
One of the most common mistake homeowners make is neglecting minor damage caused by rain, which leads to a complete roofing repair Seattle. This is when water starts to leak or collect on the roof. The best way to negate such an occurrence is by regularly inspecting the roof and siding, especially after a rainy spell. In case there is a leakage or water spotting, getting an enhanced inspection by a professional like TOV Siding is a must. This can save you from future headaches and a heap of money in repairs.
This is the number one mistake homeowners make while hiring a commercial subcontractor Seattle after the rainy season. Preparation for the rainy season is ultra-important or else the cost of construction subcontracting services Seattle increases manifold once the water seeps in. Therefore, checking for gutter holes and gaps that allow water to drain in the house damages more, consequently increasing the price of commercial construction project management Seattle.
One of the most common signs of water damage is algae and moss growth. However, this is not easily detectable, as this growth is usually under the first layer. This kind of inspection can be assisted by a professional home renovation company. Although some basic steps can be followed to check moss growth. Moss thrives in Seattle’s damp, shaded conditions, particularly on north-facing roof slopes. While it may seem harmless, moss traps moisture against shingles, lifting edges and allowing water to penetrate beneath.
Before the roof or siding gives way, it signals out for the keen eye. Watch out for loose shingles or a change in the appearance of the roof/siding. Exposed nails, insulation and loose flashing are also great indicators of roof and siding damage. Heavy rain and windstorms can easily dislodge parts of the roof and siding which if left unnoticed, can lead to far greater damage than imagined. Keeping an eye out for such changes can help in early repair of the damage at a fraction of the cost.
Apart from inspections, regular maintenance also plays an important part in safeguarding the roof and siding from weather effects. Ongoing maintenance helps in preventing minor issues from becoming raging monsters. Maintenance is followed by inspection because that can only indicate a problem that needs fixing. However, regular maintenance can assist in keeping long-term damage at bay. Let us look at some of the basic maintenance practices that keep sidings and roofing safe for living in the long term.
Regular cleaning of the sidings can help in removing algae, dust and moisture in its early stage. Using water alone cannot be enough in this case and therefore, soft cleaning solutions should be used to clean the sidings. Always remember that harsh pressure should never be used for such cleaning, as it can dislodge the siding and add water within the surface, which can lead to further moisture accumulation. Clean siding not only looks better but also allows homeowners to spot developing issues, such as small cracks or loose sections, that might otherwise go unnoticed.
Another important maintainable aspect of the home is the care of the paint. Homeowners usually neglect this part and leave it for one one-time paint job after a certain amount of time. As per professional roofing contractor Seattle and siding contractor Washington, this is a very bad idea and goes directly against good home maintenance practices. Paint provides an extra layer of defense against moisture and dampness. Any cracks or changes in paint should be immediately addressed once noticed during maintenance. Reapplying sealants where needed helps maintain a watertight exterior and prevents moisture from reaching structural components behind the siding.
Roof and siding performance are closely linked to ventilation. Poor attic ventilation allows moisture to accumulate beneath the roof deck, leading to mold, rot, and premature shingle failure. Between inspections, homeowners can monitor for condensation, musty odors, or uneven roof temperatures. Proper airflow helps materials dry more quickly after rain, reducing long-term moisture damage.
Wild and natural growth around the home is a natural disaster waiting to happen. They do add beauty but also add hazard to the roof and siding since debris can hold moisture as well as block gutters. All of this can lead to mold accumulation which is the worst enemy of the home exterior. Trimming vegetation away from the roof and siding improves sunlight exposure and airflow, helping exterior materials dry more efficiently after rainfall.
Flashing is one of the most critical yet overlooked components of roof maintenance. It seals vulnerable areas where the roof meets chimneys, skylights, vents, and walls. Over time, flashing can loosen or corrode, especially in wet climates. Homeowners should periodically look for gaps, rust, or lifted edges. Early attention to flashing issues helps prevent leaks that often remain hidden until significant damage occurs.
The basic difference between an inspection and a repair is the cost of both. Self-inspection is free of cost, whereas repair needs financial input. However, professional inspections cost money but the basic ones don’t. It is always recommended by experts at TOV Siding to get professional inspections carried out, as it saves tons of repair costs in the future. Knowing when maintenance becomes a repair issue is a very thin line. Addressing issues found in maintenance early can reduce the repair and prevents widespread damage.
The only way to keep your roof and siding intact is by performing regular checks throughout the year. These checks include checking for holes or gaps in the attic (or the whole house), keeping the current insulation dry, not allowing water to drain in the walls or stay on the roof/chimneys and finally getting a professional inspection by an experienced roofing contractor Seattle or siding contractor Washington. By doing so, you will save money eventually in the long term and season term as well.
If you are looking for a professional home inspection followed by repair that doesn’t cost a fortune, then contact of the most experienced experts for a free consult here!!
You might also like these..
We always put our client’s preferences and budgets at the top priority. Why don’t you send us a message today to get a free estimate for your remodeling needs?
Phone : (425) 350-9283
Email : BrianS@unitedseattle.com
